[. . . ] Start Here Easy Setup Instructions Series Photo Printer 1 Unpack the Printer 2 Prepare the Printer 3 Install the Print Head 4 Install the Ink Tanks 5 Connect the Printer and Load Paper 1 Carefully remove all items from the box. 1 Remove the shipping tape from the front 1 Remove the print head from its package. 1 Peel back the orange tab and completely and back of the printer. remove the plastic wrapper from the Magenta Ink Tank (BCI-6M). IMPORTANT: Be sure the printer is off before continuing, or the computer will attempt to install the printer driver before the printer is ready. 2 Plug the power cord into the back of the printer and connect the other end to a power outlet. [. . . ] b. Double-click the Memory Card Utility 300. mpkg icon, then follow the on-screen instructions. "Setup Software & User's Guide" CD-ROM. NOTE: Log on as an Administrator before continuing. 2 Double-click the CD-ROM icon, then the Mac OS X folder, then the Printer Driver folder. d. Ensure that letter size paper is loaded in the sheet feeder (top paper feeder). IMPORTANT: If your computer cannot detect a printer port, click Help and refer to the online instructions. 5 Follow the on-screen instructions to install the 3 Double-click the PIXMA iP6000D 290. pkg icon, 2 Close any open software applications remaining software. When the "Installation Results" window appears, click OK. 6 Follow the on-screen instructions to register then follow the on-screen instructions. NOTE: When the "Authenticate" screen appears, enter your administrator name and password. If you do not know your administrator name or password, click , then follow the on-screen instructions. e. Click the down-arrow to select Test Print. Click the Print Head Alignment icon and follow the on-screen instructions. including anti-virus, computer security and other software. The setup program should run automatically. NOTE: If the setup program does not run, click Start, then Run, then type D:\msetup. exe, where D is your CD-ROM drive. 3 When the main menu appears, click c. When the message "The software was successfully installed" appears, click Restart. 7 Start the print head alignment procedure. your product. 7 When the "Print Head Alignment" screen appears, ensure that letter size paper is loaded in the sheet feeder (top paper feeder). Click Execute and follow on-screen instructions. NOTE: When the "Authenticate" screen appears, enter your administrator name and password. [. . . ] All other products and brand names are registered trademarks or trademarks of their respective owners. [. . . ]